China Phenolic Fiberglass Molding abavelisi kunye nabanikezeli

Phenolic Fiberglass Molding Tape

inkcazelo emfutshane:

I-4330-2 I-Phenolic Glass Fiber Molding Compound ye-Insulation yoMbane (Amandla aphezulu aFixed Ubude beFibers) Ukusetyenziswa: Ifanelekile kwiindawo zezakhiwo ezikhuselayo phantsi kweemeko ezizinzileyo zemilinganiselo yesakhiwo kunye namandla aphezulu omatshini, kwaye ifanelekile ukusetyenziswa kwiindawo ezinomswakama, kwaye inokucinezelwa kunye neetyhubhu ze-cylinders.

amandla okugoba:≥130-790 MPa

amandla empembelelo:≥45-239 kJ/m²

tensile strength:≥80-150 MPa

Martin ukumelana nobushushu:≥280℃, ukusebenza okuzinzileyo phantsi kobushushu obuphezulu

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ukubunjwa kwezinto eziphathekayo kunye noLungiselelo
Iribhoni i-phenolic glass fiber molding compounds yenziwa ngokusebenzisa i-phenolic resin njenge-binder, ifaka imicu yeglasi engena-alkali (enokuthi ibe yinde okanye i-chaotically oriented), kwaye emva koko yomiswe kunye nokubumba ukwenza i-ribbon prepreg. Ezinye izilungisi zingongezwa ngexesha lokulungiselela ukulungiselela ukusetyenzwa kakuhle okanye iimpawu ezithile zephysicochemical.
Ukuqiniswa: Iifiber zeglasi zibonelela ngamandla omatshini aphezulu kunye nokuchasana kwempembelelo;
I-resin matrix: ii-phenolic resins zinika ukuxhathisa ubushushu kunye neempawu zokugquma umbane;
Izongezo: zingabandakanya iiretardants zomlilo, izithambiso, njl., kuxhomekeke kwiimfuno zesicelo.
Iimpawu zoMsebenzi

Iimpawu zokusebenza	Uluhlu lweparameter/iimpawu
Iimpawu zoomatshini	Amandla e-Flexural ≥ 130-790 MPa, amandla empembelelo ≥ 45-239 kJ/m², amandla okuqina ≥ 80-150 MPa
Ukumelana nobushushu	Ubushushu beMartin ≥ 280 ℃, ukuzinza kobushushu obuphezulu
Iimpawu zombane	ukumelana nomphezulu ≥ 1 × 10¹² Ω, ukuxhathisa umthamo ≥ 1 × 10¹⁰ Ω-m, amandla ombane ≥ 13-17.8 MV/m
Ukufunxwa kwamanzi	≤20 mg (ukufunxwa kwamanzi aphantsi, alungele iindawo ezifumileyo)
Ukuncipha	≤0.15% (uzinzo oluphezulu lwe-dimensional)
Ukuxinana	1.60-1.85 g/cm³ (ikhaphukhaphu kunye namandla aphezulu)

ITekhnoloji yoLungiso

1. Iimeko zoxinzelelo:

Ubushushu: 150±5°C
Uxinzelelo: 350±50kg/cm²
Ixesha: 1-1.5 imizuzu / mm ubukhulu

2. Indlela yokwenza: i-lamination, i-compression molding, okanye i-low-pressure molding, ifanelekile kwiimilo eziyinkimbinkimbi ze-strip okanye i-sheet-like-structural parts.

Imiba yosetyenziso

Ukugquma kombane: izinto ezihlaziyiweyo, izithinteli zemoto, njl.
Amalungu oomatshini: iindawo zesakhiwo ezomeleleyo (umzekelo, izindlu, iigiya), iinxalenye zenjini yeemoto;
I-Aerospace: Ikhaphukhaphu, iindawo ezinobushushu obuphezulu (umzekelo, izibiyeli zangaphakathi zenqwelomoya);
Intsimi yolwakhiwo: inkxaso yombhobho enganyangekiyo, itemplates zokwakha, njl.

UGcino kunye noLungelo

Iimeko zokugcina: Kufuneka ibekwe kwindawo epholileyo neyomileyo ukuthintela ukufunxa ukufuma okanye ukuhla kobushushu; ukuba ichaphazeleka kukufuma, kufuneka ibhakwe kwi-90±5℃ imizuzu emi-2-4 ngaphambi kokusetyenziswa;
Ubomi beShelf: ukuba isetyenziswe kwiinyanga ezi-3 ukususela kumhla wokuvelisa, ukusebenza kufuneka kuphinde kuhlolwe emva kokuphelelwa yisikhathi;
Ukuthintela uxinzelelo olunzima: ukukhusela umonakalo kwisakhiwo sefiber.

Umzekelo wemodeli yemveliso

I-FX-501: Ubuninzi be-1.60-1.85 g / cm³, amandla e-Flexural ≥130 MPa, amandla ombane ≥14 MV / m;
I-4330-1 (isalathiso esingcolileyo): i-high-insulating insulating structural parts for the humid environments, ukugoba amandla ≥60 MPa.