I-Phenolic Reinforced Molding Compound 4330-3 Shunds
Ingcaciso yeMveliso
4330-3, le mveliso isetyenziselwa kakhulu ukubumba, ukuvelisa umbane, oololiwe, ukuhamba ngeenqwelo moya, kunye nezinye iishishini ezisetyenziswa kabini, ezifana nezixhobo zoomatshini, ezinamandla aphezulu oomatshini, ubushushu obuphezulu, ubushushu obuphezulu, ukumelana nokugqwala kubushushu obuphantsi kunye nezinye iimpawu.
Le mveliso yi-thermosetting molding compound eyenziwe nge-phenolic resin okanye i-resin yayo eguquliweyo njenge-binder, ene-alkali-free glass fiber warn kunye nezinye izongezo.
Iinkcukacha zeMveliso
| Umgangatho woVavanyo | JB/T5822- 2015 | |||
| HAYI. | Izinto zovavanyo | Iyunithi | BH4330-1 | BH4330-2 |
| 1 | Umxholo weResin | % | Inokuxoxiswana | Inokuxoxiswana |
| 2 | Umxholo wezinto eziguquguqukayo | % | 4.0-8.5 | 3.0-7.0 |
| 3 | Uxinano | g/cm3 | 1.65-1.85 | 1.70-1.90 |
| 4 | Ukufunxwa kwamanzi | % | ≦0.2 | ≦0.2 |
| 5 | Ubushushu bukaMartin | ℃ | ≧280 | ≧280 |
| 6 | Amandla Okugoba | I-MPa | ≧160 | ≧450 |
| 7 | Amandla empembelelo | KJ/m2 | ≧50 | ≧180 |
| 8 | Tensile strength | I-MPa | ≧80 | ≧ 300 |
| 9 | Ukumelana nomphezulu | Ω | ≧10×1011 | ≧10×1011 |
| 10 | Ukumelana nomthamo | Ω.m | ≧10×1011 | ≧10×1011 |
| 11 | Isinxibo esiphakathi (1MH)Z) | - | ≦0.04 | ≦0.04 |
| 12 | Imvume enxulumeneyo (1MHZ) | - | ≦7 | ≦7 |
| 13 | Amandla eDielectric | I-MV/m | ≧16.0 | ≧16.0 |
I-Storge
Ifanele igcinwe kwigumbi elomileyo nelinomoya apho ubushushu bungadluli kwi-30℃.
Musa ukuvala umlilo, ukufudumeza kunye nokukhanya kwelanga ngqo, zibekwe kwindawo ekhethekileyo, zibekwe ngokuthe tye kwaye zicinezelwe kakhulu.
Ixesha lokuphelelwa lixesha ziinyanga ezimbini ukususela kumhla wokuveliswa. Emva kwexesha lokugcina, imveliso ingasetyenziswa emva kokuphumelela uhlolo ngokwemigangatho yemveliso. Umgangatho wobugcisa: JB/T5822-2015
